TA271 Adaptor

Specs:

• D9 Connector To Single BNC Connector
• For PicoScope 4444 Differential or Current Probes

The TA271 D9-BNC adaptor lets you use traditional oscilloscope voltage and current probes, and make single-ended measurements with a ground-referenced probe. It is also essential when using the TA325 and TA326 current probes. The adaptor grounds the negative input of the channel.

The PicoScope 4444 will identify the TA271 adaptor, but not the probe connected to it. Use the Channel Options menu in the PicoScope 6 software to set up your probe. If necessary, follow the steps below to compensate your probe using the pins on the back of the scope unit.